Friday, April 12, 2013
BMW E46 3-series E36 M3 & 3 series front installation instructions
Most of the 17 "wheels to clear the outer diameter thickness of 328 or 332mm rotor Kit. 355 Mm Kit at least 18 "wheel is typically required, and 380 mm rotor Kit, you need at least 19" wheel. The critical difference, however, is the status of the wheel spokes and the face of the thickness. Do not assume that the larger the diameter of the wheel in automatically empties the face thickness.
To determine the actual distance between the surfaces of the metal in the face of the wheel on the inside of the rotor in stock, www.stoptech.com on the home page of the website and click the StopTech "wheel fitment Charts" link. BEFORE YOU print out a copy of the wheel to be mounted on the drawing for your car, click on the "using the charts?"link at the top of the page and read the instructions carefully to ensure that you fully understand how to measure critical wheel clearances. Until then if you click on the link for your vehicle, and print out the relevant wheel fitment on the drawing, use the measurement as a template.
Is very important to check the accuracy of the output of the scale corresponds to the width and length dimensions of the car. StopTech recommends a minimum 2 mm more space to add these dimensions the dimensions is indicated in mm, but in one dimension, for each direction is also displayed in inches. Follow the instructions carefully, to produce the installation in the model and to ensure that the measurements are very accurate.
Download here
No comments:
Post a Comment